Oil-Embedded Ball Joint Rod Ends with Grease Fitting
Lubricant is progressively released to the rod end by a bronze insert with imbedded oil. Relubricate by connecting your grease gun to the fitting. These rod ends, which are made of zinc-plated steel, can typically support heavier weights than stainless steel, aluminium, and nylon rod ends and have a moderate level of corrosion resistance.
| SKU | Radial Load Cap. - Static | Internal Dia. (ID) | ShankThreadSize | ShankCenterLg. | ShankThreadLg. | Max.BallSwivel | Material | O'allThick | O'allWidth | Shank Thread Direction |
|---|---|---|---|---|---|---|---|---|---|---|
| UA1D_7V14 | 3515.3 kg | --- | M12 x 1.75 mm | 54 mm | 33 mm | 17 | Zinc-Plated Carbon Steel | 16 mm | --- | --- |
|
x
Oil-Embedded Ball Joint Rod Ends with Grease Fitting
Estimated Delivery - 15 to 17 days
€23.89
|
||||||||||
| UA1D_7V13 | 2834.9 kg | --- | M10 x 1.5 mm | 48 mm | 29 mm | 17 | Zinc-Plated Carbon Steel | 14 mm | --- | --- |
|
x
Oil-Embedded Ball Joint Rod Ends with Grease Fitting
Estimated Delivery - 15 to 17 days
€16.68
|
||||||||||
| UA1D_7V12 | --- | --- | M8 x 1.25 mm | 42 mm | 25 mm | 18 | Zinc-Plated Carbon Steel | 12 mm | --- | --- |
|
x
Oil-Embedded Ball Joint Rod Ends with Grease Fitting
Estimated Delivery - 15 to 17 days
€14.61
|
||||||||||