Thrust Ball Bearings for Shaft Ends
Make use of these bearings as tiny, precise turntables. Because of their special construction, your shaft may rest on top of the bearing as opposed to being put through it. Bearings can press fit into a hole or be glued to a mounting plate.
| SKU | For Shaft Dia. | Ring Material | Max. Speed, rpm | Lubrication | Temp. Range | OD | Thick | Thrust Load Cap. - Static | Thrust Load Cap. - Dynamic |
|---|---|---|---|---|---|---|---|---|---|
| UA1A_44V13 | 42.9mm | Steel | 1500 | Required | -40° to 121° C | 42.9mm | 31.8mm | 6395.6 kg | 3424.6 kg |
| UA1A_44V12 | 36.5mm | Steel | 1500 | Required | -40° to 121° C | 36.5mm | 30.2mm | 4626.6 kg | 2585.5 kg |
| UA1A_44V11 | 30.2mm | Steel | 1500 | Required | -40° to 121° C | 30.2mm | 23.8mm | 3401.9 kg | 1950.4 kg |
| UA1A_44V10 | 28.6mm | Steel | 1500 | Required | -40° to 121° C | 28.6mm | 22.2mm | 2857.6 kg | 1655.6 kg |
| UA1A_44V9 | 25.4mm | Steel | 1500 | Required | -40° to 121° C | 25.4mm | 19.0mm | 2358.7 kg | 1383.5 kg |
| UA1A_44V8 | 23.8mm | Steel | 1500 | Required | -40° to 121° C | 23.8mm | 19.0mm | 1973.1 kg | 1179.3 kg |
| UA1A_44V7 | 22.2mm | Steel | 1500 | Required | -40° to 121° C | 22.2mm | 17.5mm | 1587.6 kg | 975.2 kg |
| UA1A_44V6 | 20.6mm | Steel | 1500 | Required | -40° to 121° C | 20.6mm | 15.9mm | 1587.6 kg | 975.2 kg |
| UA1A_44V5 | 19.0mm | Steel | 1500 | Required | -40° to 121° C | 19.0mm | 14.3mm | 1247.4 kg | 771.1 kg |
| UA1A_44V4 | 17.5mm | Steel | 1500 | Required | -40° to 121° C | 17.5mm | 12.7mm | 952.5 kg | 589.7 kg |
| UA1A_44V3 | 15.9mm | Steel | 1500 | Required | -40° to 121° C | 15.9mm | 11.1mm | 839.1 kg | 521.6 kg |
| UA1A_44V2 | 12.7mm | Steel | 1500 | Required | -40° to 121° C | 12.7mm | 7.9mm | 499.0 kg | 317.5 kg |
| UA1A_44V1 | 9.5mm | Steel | 1500 | Required | -40° to 121° C | 9.5mm | 6.3mm | 281.2 kg | 181.4 kg |