Externally Threaded Clevis Rod Ends

You may create a linkage with a tapped tube or any female-threaded connection by using a male-threaded shank. All are made of zinc-plated steel for moderate corrosion resistance and are suitable for a wide range of pivot-point applications. There are no clevis pins provided.
SKU | Internal Dia. (ID) | ShankThreadSize | ShankCenterLg. | ShankThreadLg. | O'allWidth | Shank Thread Direction | JawCenterLg. | JawOpeningWd. | Tensile Strength, psi |
---|---|---|---|---|---|---|---|---|---|
Zinc-Plated Carbon Steel | |||||||||
... | |||||||||
UA1C_20V11 | 12.7mm | --- | 85.7mm | 50.8mm | --- | Right Hand, Left Hand | 34.9mm | 9.5mm | 90000 |
UA1C_20V10 | 9.5mm | --- | 85.7mm | 50.8mm | --- | Right Hand, Left Hand | 34.9mm | 9.5mm | 90000 |
UA1C_20V9 | 12.7mm | --- | 85.7mm | 50.8mm | --- | Right Hand, Left Hand | 34.9mm | 9.5mm | 90000 |
UA1C_20V8 | 11.1mm | --- | 85.7mm | 50.8mm | --- | Right Hand, Left Hand | 34.9mm | 9.5mm | 90000 |
UA1C_20V7 | 9.5mm | --- | 85.7mm | 50.8mm | --- | Right Hand, Left Hand | 34.9mm | 9.5mm | 90000 |
UA1C_20V6 | 11.1mm | --- | 85.7mm | 50.8mm | --- | Right Hand, Left Hand | 34.9mm | 9.5mm | 90000 |
UA1C_20V5 | 9.5mm | --- | 63.5mm | 38.1mm | --- | Right Hand, Left Hand | 25.4mm | 6.3mm | 90000 |
UA1C_20V4 | 7.9mm | --- | 63.5mm | 38.1mm | --- | Right Hand, Left Hand | 25.4mm | 6.3mm | 90000 |
UA1C_20V3 | 7.9mm | --- | 57.1mm | 31.8mm | --- | Right Hand, Left Hand | 25.4mm | 4.8mm | 90000 |
UA1C_20V2 | 7.9mm | --- | 57.1mm | 31.8mm | --- | Right Hand, Left Hand | 25.4mm | 4.8mm | 90000 |
UA1C_20V1 | 6.3mm | --- | 57.1mm | 31.8mm | --- | Right Hand, Left Hand | 25.4mm | 4.8mm | 90000 |