High-Temperature Linear Ball Bearings

The preferred option for low-friction mobility in hot situations. Bearings feature a fixed-alignment design for situations where shaft misalignment is unlikely and are intended for use with round end-supported shafts. Slide bearings into a housing to assemble (not included). Secure with two retaining rings for bearings that have retaining ring grooves (sold individually).
Compared to steel bearings, stainless steel bearings are more corrosion resistant.
SKU | For Shaft Dia. | For Housing Inner Dia. | For Shaft Material | With End Seals | Max. Temp. Range | Overall Lg. | Load Capacity Dynamic |
---|---|---|---|---|---|---|---|
Fixed Alignmenta Metric | |||||||
Steel Bearings with Steel Balls | |||||||
UA1G_22V3 | 60mm | 90.000 - 90.035mm | --- | --- | --- | 110mm | --- |
UA1G_9V18 | 60mm | 90.000 - 90.035mm | --- | --- | --- | 110mm | --- |
UA1G_9V12 | 12mm | 21.000 - 21.021mm | --- | --- | --- | 30mm | --- |
UA1G_9V17 | 40mm | 60.000 - 60.030mm | --- | --- | --- | 80mm | --- |
UA1G_9V16 | 30mm | 45.000 - 45.025mm | --- | --- | --- | 64mm | --- |
UA1G_9V15 | 25mm | 40.000 - 40.025mm | --- | --- | --- | 59mm | --- |
UA1G_9V14 | 20mm | 32.000 - 32.025mm | --- | --- | --- | 42mm | --- |
UA1G_9V13 | 16mm | 28.000 - 28.021mm | --- | --- | --- | 37mm | --- |
UA1G_9V11 | 10mm | 19.000 - 19.021mm | --- | --- | --- | 29mm | --- |
UA1G_9V10 | 8 mm | 15.000 - 15.018mm | --- | --- | --- | 24mm | --- |
UA1G_9V9 | 6mm | 12.000 - 12.018mm | --- | --- | --- | 19mm | --- |
UA1G_9V8 | 5mm | 10.000 - 10.018mm | --- | --- | --- | 15mm | --- |
UA1G_9V7 | 4mm | 8.000 - 8.015mm | --- | --- | --- | 12mm | --- |
UA1G_9V6 | 3mm | 7.000 - 7.015mm | --- | --- | --- | 10mm | --- |