Motorized Roller Conveyors
These line-shaft conveyors, also known as round-belt conveyors, are driven by a drive shaft and round belts. Even when the accumulation of packages may cause some rollers to stop turning, the drive shaft continues to run. They can be hardwired for material flow in either direction, and only straight conveyor sections contain a motor, powering up to 60 ft. of conveyor extensions on either side. The 90° curved conveyor extensions have tapered rollers that keep packages centered.
To increase capacity, use a stand at each end for straight conveyors and extensions, and add an additional stand in the center. For 90° curved conveyor extensions, use a stand at each end plus a stand in the center. Connected conveyor sections share a stand. The capacities are based on an evenly distributed load, and the length of the material being conveyed should be at least three times the roller spacing.
| SKU | Bearing Trade Number | Mounting Hole Diameter | For Shaft Dia. | Wall Thickness | Temper Rating | Flexibility | Construction | Maximum Pressure | For Housing Inner Dia. | For Screw Size | Outer Circle | Lengths Fit | Number of Splines | For Cord OD | For Knockout Trade Size | Surface Yield Strength | Belt Trade Number | Yield Strength | Heat Treatment | Housing Thickness | Clamping Screw Thread Size | Hardness Rating | Id Surface Smoothness (rms) microns | No. of Mounting Holes | Hardness | Edge Type | Retaining Ring Groove End-to-End Length | Straightness Tolerance | Surface Smoothness | For Shaft Material | With End Seals | Length Tolerance | Step Diameter | Repeatability | Dynamic Load Capacity Vertical | Dynamic Horizontal Load Capacity | Maximum Speed | Max Motor Speed | Step Length | Travel Distance per Turn | Max Motor Torque in.-oz | Diameter | Base Material | Overall Length | ABEC Rating | With Retaining Ring Grooves | Width | Ring Material | Combined Load Cap. - Dynamic | Groove Width | Combined Load Cap. - Static | Max. Speed, rpm | Lubrication | Contact Angle | Roller Projection | Bolt Circle Diameter | For ID | Capacity per Caster | Wheel Bearing Material | Accuracy for Travel Distance per Turn | External Thread Length | External Thread Size | Flange Diameter | Clamping Force | Temp. Range | Max. Temp. Range | Specifications Met | Overall Capacity | Carriage Width | ROHS | For Bore Size | Wheel Diameter | Wheel width | Carriage length ,mm | REACH | Radial Load Cap - Dynamic kg | Specifications Met | Radial Load Cap. - Static, kg | Radial Load Cap. - Dynamic | Lubrication | ABEC Rating | Temp. Range, °F | Maximum Speed | Dynamic Load Capacity | Radial Load Cap. - Static | Retaining Ring - OD | Retaining Ring - Thick. | Inner Ring - Outer Dia. | Inner Ring - Width | OD | Thick | For Maximum Shaft Diameter | Shaft Diameter | For Shaft Diameter | Cage Material | Washer Material | Thrust Load Cap. - Static | Stroke Length | Stroke Length Range | RoHS | Thrust Load Cap. - Dynamic | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Internal Dia. (ID) | Includes | Flange - OD | Flange - Thick | Type | Bearing Trade No. | For Shaft Width | Hex Width | Features | Min. Sheet Metal Thick. | Spline OD | Includes | Misalignment Capability | Rate of Taper | Inner Ring Outer Dia. Tolerance | Inner Ring Width | Seal Type | Taper | Environmental Rating | Ball Bearing OD, mm | Ball Bearing Width | For Shaft Surface Smoothness (Ra), microns | For Shaft Surface Smoothness (Ra), microinch | Max.Torque, ft.-lbs. | ShankThreadSize | ShankCenterLg. | ShankThreadLg. | BallStudThreadSize | Mount Height | BallStudCenterLg. | BallStudThreadLg. | Mounting Orientation | Max.BallSwivel | BallStudThreadDirection | Material | O'allThick | O'allWidth | Shank Thread Pitch | Thread Direction | Pkg.Qty. | Shank Dia. | Shank Thread Direction | Clearance 3.17 cm on Track | ShankThreading | Ring Material | JawCenterLg. | Fastener Strength Grade/Class | JawOpeningWd. | Tensile Strength, psi | Roller Dia. | Roller Width | Roller Spacing | Stud Lg. | Thread Lg. | Thread Size | Choose a Durometer(HardnessRating) | O'all Height | Shoulder Lg. | Shoulder Dia. | LoadCapacity,kg. Static | LoadCapacity,kg. Dynamic | Mounting Hole Center-to-Center | Center Ht. | Overall Lg. | Mounting Holes Dia. | Bolt Circle Dia. | Width | Lubrication | Lubricant | Length | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Specifications Met | End Type | Load Capacity Dynamic | Dynamic Thrust Load Capacity | Spline Length | Max. Torque Nm | PV Max. | For Motion Type | Misalignment Capability, Parallel (mm) | Misalignment Capability, Angular | Misalignment Capability, Axial | For Shaft, Dp. | Joint Dia. | Keyway, Wd. | Keyway, Dp. | Max. Operating Angle | Torque, 3° Operating Angle | Torque, 10° Operating Angle | Joint Type | Bellows Material | For Panel Cutout Dia. | Max. Torque, Clockwise Drive | Max. Torque, Counterclockwise Drive | Retracted | Bend Radius | O'all Lg., ft. | Max. Temp., °F | Center Material | Torque-Limiting Direction | Hub Material | Bore Dp. | Extendeds | Extended Length Range | Retracted Range | Keyway Wd. × Keyway Dp. | Roller Chain, Standard | Roller Chain, Trade Size | Max. Torque @ rpm | Clamping Screw, Type | Center Height | Center Height Tolerance | Clamping Screw, No. Included | Mounting Holes Thread Size | Mounting Holes, No. of | For Shaft, Thread Pitch | Flat-to-Flat Ht. | REACH | Wd. | Handle1 | Thread Pitch | Handle length | Handle Diameter | Locknuts, Specifications Met | Locknuts, OD | Locknuts, Wd. | Locknuts Thread Spacing | Mounting | Ht. | Mounting Holes, Thread Size | Locknuts Thread Size | Outer Dia Range | Hub Width | Mounting Hole ctr to ctr length | Locknuts Thread Pitch (mm) | Mounting Hole ctr to ctr wd | Locknuts, Insert Max. Temp °C | Nuts, For Lock Washer | Mounting Holes, Thread Pitch | Maximum Temperature | Keyway Size (Wd. × Dp.) | Choose a Shaft Dia. (A) | Choose a Shaft Dia. (B) | Choose a Keyway Size (Wd. × Dp.) for Shaft Dia. (A) | Choose a Keyway Size (Wd. × Dp.) for Shaft Dia (B) | Tolerance Rating | Pkg. Qty. | Tolerance, Wd. | Tolerance, Ht. | Pitch (mm) | Inside Width | Bore Type | Thickness | Inside Wd. | Outside Wd. | Overall Wd. | Flange Thickness | Fastener Tightening Torque | Overall Width | Pitch Dia. | Hub Dia. | Maximum Torque | Keyway Depth | Keyway Width | Minimum Hardness | Force @ 100 psi | Body Material | Approximate No of Links per Ft | Reinforcement Material | Connection Material | Woodruff Key Number | Air Inlet Pipe Size | Outer Circumference | For Keyway Dia. | Number of Flanges | Number of Thread Starts | Static Load Capacity | Number of Teeth | Hub Diameter | Temper | Pressure Angle | Temperature Range, °F | Module | Gear Pitch Dia | Width | Width between Frame | Speed Ratio | Face Width | Fabrication | Head, Lg. | End Ht. | Height Frame | Overall Height | For Housing ID | Head, Ht. | Outer Dia | Bushing Style | For Bushing Style | Basket | Feet Ht. | Frame | Frame Material | For Hub Keyway, Wd. (A) | For Hub Keyway, Ht. (B) | Environmental Rating | For Hub Keyway, Wd. (A) Tolerance | For Shaft Keyway, Wd. (C) | For Shaft Keyway, Ht. (D) | Static Radial Load Capacity | Thread Type | For Shaft Keyway, Wd. (C) Tolerance | For Max. Belt Wd. | Height × Width | Bearing Type | Pitch Height | For Shaft Type | Features | Height | Color | Gender | Max. Torque Nm | Dia. | Variant Group 1 | Set Screw Type | Set Screw, No. Included | AC Voltage | Manufacturer Series | Lever, Ht. | Lever, Lg. | Lever Material | Variant Group 2 | Variant Group 3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Straight Conveyors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 48.3mm Dia. Galvanized Steel Rollers—11.1mm Hex Axle | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| UA11A_46V4 | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | 6.3mm | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | RoHS 3 (2015/863/EU) Compliant | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | Connecting Plates | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | 76.2mm | --- | --- | --- | --- | --- | --- | --- | --- | 88.8 | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | REACH (EC 1907/2006) (07/16/2019, 201 SVHC) Compliant | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | 889.0mm | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | 812.8mm | --- | --- | --- | --- | --- | 139.7mm | 914.4mm-1219.2mm | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | Straight Conveyors | --- | --- | --- | --- | --- | --- | --- | 48.3mm Dia. Galvanized Steel Rollers—11.1mm Hex Axle | 91.4cm Lg. |
|
x
Motorized Roller Conveyors
Estimated Delivery - 15 to 17 days
€2,516.92
Out of stock
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| UA11A_46V3 | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | 6.3mm | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | RoHS 3 (2015/863/EU) Compliant | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | Connecting Plates | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | 76.2mm | --- | --- | --- | --- | --- | --- | --- | --- | 88.8 | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | REACH (EC 1907/2006) (07/16/2019, 201 SVHC) Compliant | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | 635.0mm | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | 558.8mm | --- | --- | --- | --- | --- | 139.7mm | 914.4mm-1219.2mm | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | ||||||||||||||||||||||