Search results for: 'vibration+damping+grommets+12'
SKU | Bearing Trade Number | Mounting Hole Diameter | For Shaft Dia. | Wall Thickness | Temper Rating | Flexibility | Construction | Maximum Pressure | For Housing Inner Dia. | For Screw Size | Outer Circle | Lengths Fit | Number of Splines | For Cord OD | For Knockout Trade Size | Surface Yield Strength | Belt Trade Number | Yield Strength | Heat Treatment | Housing Thickness | Clamping Screw Thread Size | Hardness Rating | Id Surface Smoothness (rms) microns | No. of Mounting Holes | Hardness | Edge Type | Retaining Ring Groove End-to-End Length | Straightness Tolerance | Surface Smoothness | For Shaft Material | With End Seals | Length Tolerance | Step Diameter | Repeatability | Dynamic Load Capacity Vertical | Dynamic Horizontal Load Capacity | Maximum Speed | Max Motor Speed | Step Length | Travel Distance per Turn | Max Motor Torque in.-oz | Diameter | Base Material | Overall Length | ABEC Rating | With Retaining Ring Grooves | Width | Ring Material | Combined Load Cap. - Dynamic | Groove Width | Combined Load Cap. - Static | Max. Speed, rpm | Lubrication | Contact Angle | Roller Projection | Bolt Circle Diameter | For ID | Capacity per Caster | Wheel Bearing Material | Accuracy for Travel Distance per Turn | External Thread Length | External Thread Size | Flange Diameter | Clamping Force | Temp. Range | Max. Temp. Range | Specifications Met | Overall Capacity | Carriage Width | ROHS | For Bore Size | Wheel Diameter | Wheel width | Carriage length ,mm | REACH | Radial Load Cap - Dynamic kg | Specifications Met | Radial Load Cap. - Static, kg | Radial Load Cap. - Dynamic | Lubrication | ABEC Rating | Temp. Range, °F | Maximum Speed | Dynamic Load Capacity | Radial Load Cap. - Static | Retaining Ring - OD | Retaining Ring - Thick. | Inner Ring - Outer Dia. | Inner Ring - Width | OD | Thick | For Maximum Shaft Diameter | Shaft Diameter | For Shaft Diameter | Cage Material | Washer Material | Misalignment Capability | Thrust Load Cap. - Static | Stroke Length | Stroke Length Range | RoHS | Thrust Load Cap. - Dynamic | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Internal Dia. (ID) | Includes | Flange - OD | Flange - Thick | Type | Bearing Trade No. | For Shaft Width | Hex Width | Features | Min. Sheet Metal Thick. | Spline OD | Includes | Extended LEngth | Misalignment Capability | Rate of Taper | Inner Ring Outer Dia. Tolerance | Inner Ring Width | Seal Type | Taper | Environmental Rating | Ball Bearing OD, mm | Ball Bearing Width | For Shaft Surface Smoothness (Ra), microns | For Shaft Surface Smoothness (Ra), microinch | Max.Torque, ft.-lbs. | ShankThreadSize | ShankCenterLg. | ShankThreadLg. | BallStudThreadSize | Mount Height | BallStudCenterLg. | BallStudThreadLg. | Mounting Orientation | Max.BallSwivel | BallStudThreadDirection | Material | O'allThick | O'allWidth | Shank Thread Pitch | Thread Direction | Pkg.Qty. | Shank Dia. | Shank Thread Direction | Clearance 3.17 cm on Track | ShankThreading | Ring Material | JawCenterLg. | Fastener Strength Grade/Class | JawOpeningWd. | Tensile Strength, psi | Roller Dia. | Roller Width | Roller Spacing | Stud Lg. | Thread Lg. | Thread Size | Choose a Durometer(HardnessRating) | O'all Height | Include | Shoulder Lg. | Shoulder Dia. | LoadCapacity,kg. Static | LoadCapacity,kg. Dynamic | Mounting Hole Center-to-Center | Center Ht. | Overall Lg. | Mounting Holes Dia. | Bolt Circle Dia. | Width | Lubrication | Lubricant | Length | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Specifications Met | End Type | Load Capacity Dynamic | Dynamic Thrust Load Capacity | Spline Length | Max. Torque Nm | PV Max. | For Motion Type | Misalignment Capability, Parallel (mm) | Misalignment Capability, Angular | Misalignment Capability, Axial | For Shaft, Dp. | Joint Dia. | Keyway, Wd. | Keyway, Dp. | Max. Operating Angle | Torque, 3° Operating Angle | Torque, 10° Operating Angle | Joint Type | Bellows Material | For Panel Cutout Dia. | Max. Torque, Clockwise Drive | Max. Torque, Counterclockwise Drive | Retracted | Bend Radius | O'all Lg., ft. | Max. Temp., °F | Center Material | Torque-Limiting Direction | Hub Material | Bore Dp. | Extendeds | Extended Length Range | Retracted Range | Keyway Wd. × Keyway Dp. | Roller Chain, Standard | Roller Chain, Trade Size | Max. Torque @ rpm | Clamping Screw, Type | Center Height | Center Height Tolerance | Clamping Screw, No. Included | Mounting Holes Thread Size | Mounting Holes, No. of | For Shaft, Thread Pitch | Flat-to-Flat Ht. | REACH | Wd. | Handle1 | Thread Pitch | Handle length | Handle Diameter | Locknuts, Specifications Met | Locknuts, OD | Locknuts, Wd. | Locknuts Thread Spacing | Mounting | Ht. | Mounting Holes, Thread Size | Locknuts Thread Size | Outer Dia Range | Hub Width | Mounting Hole ctr to ctr length | Locknuts Thread Pitch (mm) | Mounting Hole ctr to ctr wd | Locknuts, Insert Max. Temp °C | Nuts, For Lock Washer | Mounting Holes, Thread Pitch | Maximum Temperature | Keyway Size (Wd. × Dp.) | Choose a Shaft Dia. (A) | Choose a Shaft Dia. (B) | Choose a Keyway Size (Wd. × Dp.) for Shaft Dia. (A) | Choose a Keyway Size (Wd. × Dp.) for Shaft Dia (B) | Tolerance Rating | Pkg. Qty. | Tolerance, Wd. | Tolerance, Ht. | Pitch (mm) | Inside Width | Bore Type | Thickness | Inside Wd. | Outside Wd. | Overall Wd. | Flange Thickness | Fastener Tightening Torque | Overall Width | Pitch Dia. | Hub Dia. | Maximum Torque | Keyway Depth | Keyway Width | Minimum Hardness | Force @ 100 psi | Body Material | Approximate No of Links per Ft | Reinforcement Material | Connection Material | Woodruff Key Number | Air Inlet Pipe Size | Outer Circumference | For Keyway Dia. | Number of Flanges | Number of Thread Starts | Static Load Capacity | Number of Teeth | Hub Diameter | Temper | Pressure Angle | Temperature Range, °F | Module | Gear Pitch Dia | Width | Width between Frame | Speed Ratio | Face Width | Fabrication | Head, Lg. | End Ht. | Height Frame | Overall Height | For Housing ID | Head, Ht. | Outer Dia | Bushing Style | For Bushing Style | Basket | Feet Ht. | Frame | Frame Material | For Hub Keyway, Wd. (A) | For Hub Keyway, Ht. (B) | Environmental Rating | For Hub Keyway, Wd. (A) Tolerance | For Shaft Keyway, Wd. (C) | For Shaft Keyway, Ht. (D) | Static Radial Load Capacity | Thread Type | For Shaft Keyway, Wd. (C) Tolerance | For Max. Belt Wd. | Height × Width | Bearing Type | Pitch Height | For Shaft Type | Features | Height | Color | Gender | Max. Torque Nm | Dia. | Variant Group 1 | Set Screw Type | Set Screw, No. Included | AC Voltage | Manufacturer Series | Lever, Ht. | Lever, Lg. | Lever Material | Variant Group 2 | Variant Group 3 |
UA1A_28V111 | 6906-2RS | --- | 30mm | --- | --- | --- | --- | --- | 47mm | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | ABEC-1 | --- | 9 | Steel | --- | --- | --- | 7700 | Lubricated | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | -12° to 93° C | --- | --- | --- | --- | RoHS 3 (2015/863/EU) Compliant | --- | --- | --- | --- | --- | --- | --- | --- | 734.8 kg | --- | --- | --- | --- | --- | 499.0 kg | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | Sealed | --- |
x Permanently Lubricated Ball Bearings Estimated Delivery - 15 to 17 days |
Filter
Now Shopping by - For Shaft Dia. 30mm
- For Housing Inner Dia. 47mm
Shopping Options