Shaft-Mount V-Groove Track Rollers
These rollers, sometimes referred to as yoke-style cam followers, offer more mounting options than threaded track rollers. Usually, they are fastened to a shaft or clevis rod end. In order to use V-Groove Track Rollers, rollers must be used with angle rails. Due to debris falling off the inclined rail, they are effective in unclean areas and can handle radial and thrust (top and side) stresses. Every roller is constantly lubricated.
Rollers that are sealed keep out dust and other pollutants better than rollers that are protected, but they also retain heat longer. Their seals also aid in lubricant retention.
| SKU | For Shaft Dia. | Groove Width | Max. Speed, rpm | Max. Temp. Range | Radial Load Cap. - Dynamic | Radial Load Cap. - Static | Features | O'allWidth | Roller Dia. | Roller Width | Bearing Type |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel V-Groove Rollers with Seal | |||||||||||
| ... | |||||||||||
| UA1F_8V3 | 4mm | --- | 7000 | 210° C | 63.5 kg | 63.5 kg | --- | 6.3 | 14.3 | 6.3 | --- |
| UA1F_8V13 | 31.8mm | --- | Not Rated | 225° C | 7711.1 kg | 12337.7 kg | --- | 58.7 | 139.7 | 57.1 | --- |
| UA1F_8V12 | 28.6mm | --- | Not Rated | 225° C | 7711.1 kg | 12337.7 kg | --- | 52.4 | 127.0 | 50.8 | --- |
| UA1F_8V9 | 19.0mm | --- | Not Rated | 225° C | 1814.4 kg | 821.0 kg | --- | 39.7 | 88.9 | 38.1 | --- |
| UA1F_8V8 | 15.9mm | --- | Not Rated | 225° C | 1542.2 kg | 821.0 kg | --- | 33.3 | 76.2 | 31.8 | --- |
| UA1F_8V7 | --- | --- | Not Rated | 225° C | 816.5 kg | 353.8 kg | --- | 23.8 | 63.5 | 22.2 | --- |
| UA1F_8V6 | 12mm | --- | 2200 | 210° C | 589.7 kg | 589.7 kg | Single Sealed and Shielded | 15.9 | 46.0 | 15.9 | --- |
| UA1F_8V5 | 9.5 mm | --- | 3400 | 210° C | 267.6 kg | 267.6 kg | Single Sealed and Shielded | 11.1 | 31.8 | 11.1 | --- |
| UA1F_8V4 | 4.8mm | --- | 5300 | 210° C | 122.5 kg | 122.5 kg | --- | 7.9 | 20.6 | 7.9 | --- |
| UA1F_8V10 | 25.4mm | --- | 1100 | 225° C | 2721.6 kg | 9071.8 kg | --- | 46.0 | 114.3 | 44.4 | --- |
| 440C Stainless Steel V-Groove Rollers without Seal | |||||||||||
| ... | |||||||||||
| UA1F_8V21 | 4mm | --- | 7000 | 500° C | 54.4 kg | 54.4 kg | Shielded | 6.3 | 14.3 | 6.3 | --- |
| UA1F_8V24 | 15mm | --- | 1700 | 500° C | 816.5 kg | 816.5 kg | Shielded | 19.0 | 60.3 | 19.0 | --- |
| UA1F_8V23 | 12mm | --- | 2200 | 500° C | 499.0 kg | 499.0 kg | Shielded | 15.9 | 46.0 | 15.9 | --- |
| UA1F_8V22 | 9.5 mm | --- | 3400 | 500° C | 222.3 kg | 222.3 kg | Shielded | 11.1 | 31.8 | 11.1 | --- |
| Steel V-Groove Rollers without Seal | |||||||||||
| ... | |||||||||||
| UA1F_8V14 | 4mm | --- | 7000 | 245° C | 63.5 kg | 63.5 kg | Shielded | 6.3 | 14.3 | 6.3 | --- |
| UA1F_8V15 | 4.8mm | --- | 5300 | 245° C | 122.5 kg | 122.5 kg | Shielded | 7.9 | 20.6 | 7.9 | --- |
| 440C Stainless Steel V-Groove Rollers with Seal | |||||||||||
| ... | |||||||||||
| UA1F_8V20 | 22mm | --- | 1300 | 210° C | 1451.5 kg | 1451.5 kg | Single Sealed and Shielded | 25.4 | 76.2 | 25.4 | --- |
| UA1F_8V19 | 15mm | --- | 1700 | 210° C | 952.5 kg | 952.5 kg | Single Sealed and Shielded | 19.0 | 60.3 | 19.0 | --- |
| UA1F_8V18 | 12mm | --- | 2200 | 210° C | 589.7 kg | 589.7 kg | Single Sealed and Shielded | 15.9 | 46.0 | 15.9 | --- |
| UA1F_8V17 | 9.5 mm | --- | 3400 | 210° C | 267.6 kg | 267.6 kg | Single Sealed and Shielded | 11.1 | 31.8 | 11.1 | --- |
| UA1F_8V16 | 4.8mm | --- | 5300 | 210° C | 122.5 kg | 122.5 kg | --- | 7.9 | 20.6 | 7.9 | --- |
| Steel Flat Rollers with Seal | |||||||||||
| ... | |||||||||||
| UA1F_8V11 | 25.4mm | --- | 1100 | 225° C | --- | 9071.8 kg | --- | 46.0 | 76.2 | 44.4 | --- |