Stainless Steel Roller Conveyors
Our conveyors are constructed from high-quality stainless steel, making them perfect for washdown applications and resistant to corrosion. The capacity of the straight and curved conveyors can be increased by adding stands. It is recommended that the material being conveyed be at least three times the roller spacing. Please note that capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors and an additional stand in the center for curved conveyors.
| SKU | Roller Projection | Material | Ht. | Overall Width | Width between Frame | Height Frame | Variant Group 1 | Variant Group 2 |
|---|---|---|---|---|---|---|---|---|
| 90° Curved Conveyors | ||||||||
| 41.3mm Dia. Stainless Steel Rollers—11.1mm Hex Axle | ||||||||
| UA11A_47V6 | 7.9 | --- | --- | 609.6mm | 558.8 | 63.5 | 90° Curved Conveyors | 41.3mm Dia. Stainless Steel Rollers—11.1mm Hex Axle |
| UA11A_47V5 | 7.9 | --- | --- | 457.2mm | 406.4 | 63.5 | 90° Curved Conveyors | 41.3mm Dia. Stainless Steel Rollers—11.1mm Hex Axle |
| Stands | ||||||||
| For 609.6mm Overall Wd. | ||||||||
| UA11A_48V6 | --- | Stainless Steel | 787.4mm to 939.8mm | --- | --- | --- | Stands | For 609.6mm Overall Wd. |
| UA11A_48V5 | --- | Stainless Steel | 609.6mm to 762.0mm | --- | --- | --- | Stands | For 609.6mm Overall Wd. |
| UA11A_48V4 | --- | Stainless Steel | 431.8mm to 584.2mm | --- | --- | --- | Stands | For 609.6mm Overall Wd. |
| For 457.2mm Overall Wd. | ||||||||
| UA11A_48V3 | --- | Stainless Steel | 787.4mm to 939.8mm | --- | --- | --- | Stands | For 457.2mm Overall Wd. |
| UA11A_48V2 | --- | Stainless Steel | 609.6mm to 762.0mm | --- | --- | --- | Stands | For 457.2mm Overall Wd. |
| UA11A_48V1 | --- | Stainless Steel | 431.8mm to 584.2mm | --- | --- | --- | Stands | For 457.2mm Overall Wd. |